Our technicians have laid out the same data for other technicians at the following article.
Drain Valves by Size and Voltage - For TechniciansModel numbers will also be added for reference, but the list may not be complete or accurate due to machine customization. Some Model numbers list more than one size drain valve in their service manual. Therefore, it is very important to know the size and voltage of the drain valve that needs to be replaced. For example, the service manual for model number 42032X7R lists part number 96D350A71 as well as 96D250A71. Customization of the machine determines which was shipped with the machine.
Drain valves are electrically opened and/or closed. Outlet valves that are actuated with pressurized air are called Dump Valves.
For a list of Dump Valves, click
DUMP VALVES BY SIZE
2 INCH DRAIN VALVES
220 - 240 VOLT
36026X8J / 36026X8R / 36026X8W / 42026X7R / 42026X7J / 42032X7R / 42026X7W / 42032X7J / 42032X7W
PART NUMBER | DESCRIPTION | ADDITIONAL INFO |
---|
96D250A71 | DRINVAL 2"N/O MTRDR240V 50/60C | .20 - .17 AMP |
96D250B71 | DRINVAL 2"N/C MTRDR240V 50/60C | .20 - .17 AMP |
MCR09E5 / MCR12E5 / MCR16E5 / MWR09E5 / MWR12E5 / MWR12J5 / MWR12X5 /
MWR16E5 / MWR16J5 / MWR16X5 / MWT12E5 / MWT12J5 / MWT16E5 / MWT16J5 / MWT16X5
IMPORTED MACHINES96D25RAA71 | 2005035A DRAINVALRTANG 2"N/O 240V 50/60 | .24 AMP / RIGHT ANGLE (90°) |
3 INCH DRAIN VALVES
FOR INFO ON SEAL REPAIR KITS FOR 3 INCH DEPENDO DRAINS, CLICK
HERE
110 - 120 VOLT
36021C4E / 36021V5J / 36021V5Z / 36021V7J / 36021V7Z / 36026V5J / 36026V5Z / 36026V7J / 36026V7W / 36026V7Z /
42026V6J / 42026V6W / 42026V6Z / 42030V6J / 42030V6Z
96D350A37C | DRNVAL 3"N/O 120V50/60C W/COVER | .35 AMP |

NOTE ON 96D350A37C: THIS PART IS THE SUBSTITUTE FOR PART NUMBER 96D350A37
UNITS WITH REUSE SYSTEM MAY ALSO HAVE THIS NORMALLY CLOSED DRAIN VALVE96D350B37 | DRAINVAL 3"N/C MTRDRV120V 50/6 W/COVER | .35 AMP |
LEGACY 36" and 42" V Machines equipped with a 90° Dependo drain valve / 36026V5J / 36026V7J / 42026V6J
96D35RAA37 | DRAINVAL RT-ANG 3" N/O 120V 50/60C W/COVER | .35 AMP |
96D35RAA37 IS NO LONGER AVAILABLE. SEE NOTE BELOW
NOTE: CUSTOMERS
MUST PURCHASE THE RETROFIT KIT NUMBER
KBKTMDDR01 WHICH USES A STRAIGHT DEPENDO DRAIN AND A 90 DEGREE HOSE CONNECTION FOR DRAIN TO REAR APPLICATIONS.
220 - 240 VOLT
30010CGE / 30010G5E / 30010G5X / 30015C4A / 30015C4E / 30015CGE / 30015G5E / 30015G5X / 30015J4P / 30015M4G / 30015M4J / 30015M5J / 30015M6J / 30015Q4J / 30015T5E / 30015T5J / 30015T5X / 30015T6X / 30015V7J / 30015V8Z / 30015VRJ / 30015VZZ / 30020C4A / 30020M5G / 30020M4J / 30020M5J / 30020M6J / 30020M7J / 30022C4E / 30022F8J / 30022F8R / 30022F8S / 30022F8W / 30022H7J / 30022H8J / 30022J8P / 30022M4J / 30022M5J / 30022M6J / 30022S4J / 30022S5G / 30022T5E / 30022T5X / 30022T6X / 30022V6J / 30022V8Z / 30022VRJ / 30022VZZ / 30022X8J / 30022X8R / 36026X8R / / 42026FV7 / 42026X7J / 42026X7R / 42026X7W / 42026XFJ / 42032X7J / 42032X7R / 42032X7W
Import models / MCR27E5 / MWF27J8 / MWF27Z8 / MWR27E5 / MWR27J5 / MWR27X5 / MWT27E5 / MWT27J5 / MWT27X5 / 42026X7J / 42026X7W / 42032X7J / 42032X7W / 30022X8J / 30022X8W / 36026X8J / 36026X8W
SEE NEXT TABLE AND PICTURE FOR 3015/22 UNITS MANUFACTURED AFTER JAN. 201696D350A71 | DRINVAL 3"N/O MTRDR240V 50/60C DEPENDO | .20 - .17 AMP |

NOTE ON 96D350A71: IF THE CUSTOMERS MACHINE IS AN AZ MODEL 36 OR 42X8J MACHINE ASK IF THE DRAIN VALVE IS AIR OPERATED.
IF IT IS AIR OPERATED SELL 98CMCR3604. (ON THE AIR OPERATED DRAIN VALVE PAGE. LINK ABOVE)
30015T6X / 20015V8Z / 30015VRJ / 30015VZZ / 30022T6X / 30022V6J / 30022V8Z / 30022VRJ / 30022VZZ MFG AFTER 01/2016
96D350A71A | DRAINVAL 3"N/O MTRDR240V 50/60C DEPENDO MDB-3 W/BYPASS | .20 - .17 AMP |
UNITS WITH REUSE SYSTEM MAY ALSO HAVE THIS NORMALLY CLOSED DRAIN VALVE96D350B71 | DRINVAL 3"N/C MTRDR240V 50/60 W/COVER | .20 - .17 AMP |
30022H7J / 30022H8J
96D350SA71 | DRAINVAL 3" 240V50/60 SUDSPORT DEPEND-O #33021423 | .20 - .17 AMP |
MCR18E4 / MWR18E4 / MWR18J4 / MWR18J6 / MWR18X4 / MWR18X6 / MWT18E4 / MWT18J6 / MWT18X4
96D35RAA71 | DRAINVAL RT-ANG 3" 240V 50/60C | .20 - .17 AMP |
DEPENDO KITS TO REPLACE PINCH TUBE DRAIN ASSEMBLIES
SHOWN HERE
110 - 120 VOLT
KIT COMES WITH VALVE 96D350A37CPART NUMBER | DESCRIPTION | ADDTIONAL INFO |
---|
KHCDV00137 | PINCH TUBE TO DEPENDO-120V | .35 AMP |
220 - 240 VOLT
KIT COMES WITH VALVE 96D350A71KHCDV00171 | PINCH TUBE TO DEPENDO-240V | .20 - 17 AMP |


SOLENOID STILL AVAILABLE PART NUMBER 09K061D / SOLENOID 120V 60C #8940
(RETURN)