This article provides part number information for temperature probe assemblies used on washer / extractors, CBW systems, dryers, and single stage press hydraulic tanks. The probes are used to measure water temperature in Washer/Extractors and CBW systems; to measure air temperature in Dryers; and to measure oil temperature in Single Stage Press Hydraulic tanks. Dryers also use Thermo-Switch probes to open or close at pre determined temperatures.
I WASHER EXTRACTOR
Washer / Extractors all use one Temperature Probe Assembly. Part # 30R0043PB Pictured below.
For machines that did not include temperature control assemblies, there are kits to add temperature control .
For 30" EP+ Washer Extractors use Kit Number KHRGSTEP10
30015C4A, 30015C4E, 30015M4G, 30015M4J, 30015M6G, 30015M6J, 30020M5J, 30020M5G, 30022C4E, 30022C4T, 30022F8J
30015T5J, 30015V7J, 30015VRJ, 30022T5J, 30015V7J, 30022V6J, 30022VRJ
For 36"/42" EP104 Washer Extractors us Kit Number KYATC00100
36021Q4G, 36021Q6G, 36021Q6J, 36026Q4G, 36026Q4J, 36026Q6G, 36026Q6J, 42026Q4G, 42026Q4J, 42026Q6G, 42026Q6J, 36030F8R, 36030F8S, 36030F8W, 42032F7R, 42032F7S, 42032F7W
II CBW
There is one Temperature Probe on CBW systems. Part Number 30R0043PSA Pictured below.
III DRYERS
Dryers use a combination of Temperature Probes and Thermo-switches to monitor and regulate temperature.
There are two thermal switches and one temperature probe monitoring inlet temperatures.
There is one thermal switch and one temperature probe monitoring outlet (blower assembly).
Please see diagram below.
ST225-1 = Part # 30RA225T
STBB = Part # 30RA175T (pictured)
PARTS FOR INLET ASSEMBLY
T2 = 30R0045PP (For machines 58040 and up)
T2 = 30R0050PP (For 5040 / 5050 machines)
ST550-A-B = 30R0550P (Quantity 2)
PARTS FOR OUTLET ASSEMBLY (BLOWER HOUSING)
T3 = part number 30R0055PK
ST225-2 = 30R0225P (if closes at 225 degrees) / 30R0240P (if closes at 240 degrees)
Due to Machine customization, customer will have to know which thermal switch they need. Part is clearly labeled.
IV SINGLE STAGE PRESS HYDRAULIC TANK
Additional information about level temp indicator switch can be found at knowledge article
Oil Level and temp indicator in a SS press
