Milnor has used two ram manufactures over the years. HSI and HYDRAtech(also known as CRC)
| Year Ranges | Ram Manufacturer |
|---|
| -2007 | HSI |
| 2007-2010 | HSI or HYDRAtech/CRC |
| 2010- | HYDRAtech/CRC/HENGLI |
The 13 inch piston is utilized on the following models:
MP1601,
MP1603,
MP1640(with booster pump)
The 14 inch piston is utilized on the following models:
MP1540,
MP1550,
MP1556 & MP1640(without booster pump)
The 16 inch piston is utilized on the following models:
MP1602,
MP1604,
MP1650,
MP1656The 17 inch piston is utilized on the following models:
MP1A03,
MP1A50
Note: If you have a MP1640 press, you need to contact Milnor with your Serial Number and Ram Nameplate information to guarantee the proper seal is ordered.
| Bore x Stroke | Part Number | Weight |
|---|
| 13" X 36" | 27E161336 | |
| 13" X 39" | 27E161339 | 3,700 |
| 14" X 39" | 27E161439 | 4,300 |
| 16" X 39" | 27E161639 | 6,600 |
| 17" X 49" | 27E161749 | 8,500 |
KYSSRCRT02 - RAM & ROD REPAIR TOOL KIT
$1000.00 Per month rental fee, kit to be returned in good condition.
Note: seals are unique to the size of the ram and to the manufacturer of the ram.
If the cylinder is leaking hydraulic fluid at the bottom you only need a V-packing kit. If the cylinder is leaking internally, around the piston, you need a total seal kit. The tech who is doing the work should know the difference.
The complete rebuild seal kit is specific to the manufacturer. The customer must determine if they have a ram manufactured by HYDRAtech or HSI. You can confirm this on the ram nameplate.
Total Seal Kit - Piston Seals, Vee Packing, Wiper, Drain Seals
BORE
(PISTON SIZE) | HYDRAtech SEAL KIT NUMBER | HSI SEAL KIT NUMBER | BOLT KIT NUMBER |
|---|
| 13" | 27E161339C | 27E161336R | S-27E161339A |
| 14" | 27E161439C | 27E161439R | S-27E161339A |
| 16" | 27E161636C | 27E161636R | S-27E161639A |
| 17" | 27E161749C | 27E161749R | S-27E161739A |
Be careful as 27E161639R is a remanufactured cylinder. If a '6' is mistakenly typed '9' a customer may have a cylinder show up on their dock instead of a 16" HSI seal kit.
Note about bolt kits: The bolts in the bolt kit are to replace bolts between the hub and the rod and the hub and the platen.
Vee Pack Seal Kit
Vee-Packing is interchangeable between ram manufacturers.
BORE
(PISTON SIZE) | ROD DIAMETER | PART NUMBER | DESCRIPTION |
|---|
| 13" | 12" | KYSSRSR001 | VEE PACK (SPLIT V) KIT FOR 27E161339/A |
| 14" | 13" | KYSSRSR002 | VEE PACK (SPLIT V) KIT FOR 27E161439/A |
| 16" | 15" | KYSSRSR003 | VEE PACK (SPLIT V) KIT FOR 27E161639/A |
| 17" | 15.5" | KYSSRSR004 | VEE PACK (SPLIT V) KIT FOR 27E161749/A |
Wiper Seal
A wiper seal is a part of the total seal kit. To replace a wiper seal the Packing ring must be taken off the shaft which requires the platen and the hub to be removed. SO, if using split Vee packing, the wiper would not be replaced.
The wiper sits in the Vee-Packing gland and is seen from the bottom of the press around the shaft.
If it is cracked or pieces are missing, it can be ordered with the following numbers and should be changed when doing a Vee-Packing job.
The wiper seal is interchangeable between ram manufacturers.
BORE
(PISTON SIZE) | ROD SIZE | PART NUMBER | DESCRIPTION |
|---|
| 13" | 12" | 27E161336W | WIPER RING SEAL FOR 27E161336/39 |
| 14" | 13" | 27E161439W | WIPER RING SEAL FOR 27E161439 |
| 16" | 15" | 27E161636W | WIPER RING SEAL FOR 27E161636/39 |
| 17" | 15.5" | 27E161749W | WIPER RING SEAL FOR 27E161749 |
Drain Seals
The Drain seal located in the packing ring above the wiper seal. If you remove the platen and hub you can change this seal too. This seal may not provide great any great benefit. But, if you are removing the platen and hub you may consider changing this seal.
The drain seal is interchangeable between ram manufacturers
BORE
(PISTON SIZE) | PART NUMBER | DESCRIPTION |
|---|
| 13" | 27E161339D | DRAINSEAL FOR 27E161336/9A |
| 14" | 27E161439D | DRAINSEAL FOR SK2140 27E161439A |
| 16" | 27E161639D | DRAINSEAL FOR SK1633 27E161639A |
| 17" | 27E161749D | DRAINSEAL FOR SK2305 27E161749A |
Shims for Vee seal packing ring
Included in all Vee-Pack kits (KYSSRSR001, 2, 3, and 4) are:
| QTY | Part Number | Description |
|---|
| 12 | 15U314C | WASHER=CLIPPED 21/32IDX.120T |
| 12 | 07 10237A | SHIM=RAM SEAL-.023 |
| 24 | 07 10237 | SHIM=RAM SEAL-.050 |
Always ensure the same shim stack height on each bolt. DO NOT mix total shim stack heights!Remove/add shims to adjust the tightness on the seal.
