PERISTALTIC CHEMICAL INLET ASSEMBLY BY MODEL - MODEL NUMBERS 42044 THRU 72044 AND IMPORT 'M' MODELS
Peristaltic chemical inlet assemblies by model number. Inlet Hose and molded peristaltic part numbers included. Model numbers 42026 thru 72044 including import models that start with 'M'. example MCR / MWT
Many Milnor washer-extractors use molded peristaltic chemical inlets to introduce chemicals into the wash. Water valves flush the chemicals thru the peristaltic into the wash. Some units also fill the shell with water passing thru the peristaltic. In this case, a vacuum break opening is part of the molded peristaltic inlet.
This page includes models 42044 thru 72044 and Import 'M' Models. For peristaltic inlet information for models 30010 thru 42032, Click Here
The tables below list the peristaltic assembly, (when available) the molded plastic inlet, and the inlet hose that runs from the peristaltic inlet to the tank. Note that due to machine customization some part numbers may vary. For verification, please check the parts diagram link.
The smaller import models introduce chemicals thru the soap chute. Chemicals are added to the soap chute by hand on coin machines and by peristaltic inlets on E-P One Touch, EP Plus, and EP Express machines. The also have molded plastic water inlets that have the vacuum break.
The tables below will list the Soap Chute, the Flex Hose that carries the chemicals to the wash, the Peristaltic Inlet when applicable, the water inlet vacuum break, the fill hose, and Links to parts diagrams. Soap chute information does not apply to larger MWF machines.
