Article

How to Replace a Milnor Bearing Housing on Small Washer-Extractors

Printable View
« Go Back
Information
Validated
Published
How-to-Replace-a-Milnor-Bearing-House-on-Small-Washer-Extractors
Article Details
000001810
How to Replace a Milnor Bearing Housing on Small Washer-Extractors
How to Replace a Milnor Bearing Housing on Small Washer-Extractors with welded tab design rear bearing support.
This document applies to 30015, 30020, 30022Cxx, Kxx, Sxx, AND Mxx models with an oil filled bearing housing.  The rear bearing support uses 2 bolts to secure ears on the housing and tabs welded on the rear bearing support.

Later machines do not use the welded tab rear bearing support design.       

Please see the attached document. 
 
 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255