Article

How do I rebuild a can cylinder from a Milnor press?

Printable View
« Go Back
Information
Validated
Published
How-do-I-rebuild-a-27E163A17A-can-cylinder-from-a-Milnor-press
Article Details
000001572
How do I rebuild a can cylinder from a Milnor press?
This covers both 27E163A17A and 27E163A20A
Rebuild instructions and repair kit part numbers for can cylinder repair kits.
The attachments show the can cylinder construction and may help with rebuilding the cylinder and replacing the seals. In some cases, the cylinder is difficult to disassemble due to corrosion and is easier to replace the entire cylinder.

The part number for press model numbers starting with MP15xx, MP16xx, MPL5xx, or MPL6xx, the cylinder is 27E163A17A.
The part number for press model numbers starting with MP1Axx the cylinder is 27E163A20A.

Milnor used mutilple vendors for can cylinders over the years. Repair kits for each manufacturer is listed below.  
27E163A17J is a Jarp repair kit.  
27E163A17R is a Prince repair kit.
27E163A17L is a Rosenboom repair kit.  
 
27E163A17A JARP27E163A17A PRINCE
User-added imageUser-added image
  
27E163A17J - REPAIR KIT 3.25"BORE=JARP CYL.27E163A17R - REPAIR KIT 3.25"BORE=PRINCE
User-added imageUser-added image


Attached are Jarp and Prince cutaway drawings.  The drawings may not apply to other manufacturers.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255