Article

Festoon for Shuttles and other moving devices

« Go Back
Information
Validated
Published
Festoon-for-Shuttles-and-other-moving-devices
Article Details
000001301
Festoon for Shuttles and other moving devices
Festoon topics
Festoon can hang from a track or run on the floor through a plastic "gator" track.

For hanging festoon applications, the cables hang on trolleys and the trolleys are supported by track. Milnor uses 14 ga and 12 ga track.  14 ga is no longer used but repair parts are available.  If the 14 ga parts are worn and require replacement we recommend a 12 gauge replacement.  

For Festoon Cable and Connector part numbers click HERE

Complete 12GA track replacement includes :

27A76510ft. section of track -12 GA
27A765AJoint Clamp (1 per section of track)
User-added image
27A765BHanger Clamp (3 per 10ft. section of track)
User-added image
27A766Festoon Trolley Car (1 per section of track or count the existing cars)
User-added image
27A770End Clamp with 2 Cable Saddles (need 1 total)
User-added image
27A76812GA FESTOON TOW TROLLEY/2SADDLES 
You only need one of these for the shuttle end tow bar attachment 
User-added image



If you need the dryer hanging bracket (you should have this already if you are replacing 14 ga with 12 ga) 

04 23394  FESTOONRAIL HANGER-DRYER
User-added image
15K095 HXCPSCR 3/8-16UNC2AX1 GR
15U240 FLATWASHER(USS STD) 3/8"
15U255LOCKWASHER MEDIUM 3/8 ZI
15G205HXNUT 3/8-16UNC2B ZINC G
 


14 ga and 12 ga trolleys are not compatible.  You need the heavier rail for 12 ga trolleys.  
The 14 GA trolley looks like this:
 User-added image

 

If you have 2 saddles on your trolley...
27A768  (Festoon Tow Trolley/ 2 SADDL) is the stationary trolley.  

User-added image

27A767 ( Festoon Trolley / 2 SADDL)  is the moving trolley 

User-added image

ALC50074 is the Festoon pull assembly (tow bar)

 



OTHER  ATTACHMENTS

27A765 / SWIVEL HOSE ADAPTOR:
User-added image

FESTOON PULLING ASSEMBLY
04 20750B PAD CLAMP
04 20750 PAD CABLE CLAMP
04 20750D PAD AIR LINE CLAMP
User-added image


 

Festoon cable part numbers:

09VFF0814 (Yellow 14 AWG with 8 conductors)
This cable is not shielded.  We use this for the control wires such as photo eyes and proximity switches.


09VFF0816S (Black 16 AWG with 8 conductors)
This cable is shielded. It used for the motor power leads. Inverter driven motors may create Electromagnetic interference (EMI) with other control signals.  The shield prevents problems with EMI.  

 

 

Festoon cable connectors

09VFF0814B / CONN. 14/8 CABLE DOW #FC-816C
09VFF0814D / CONN.12AWC 4&8 14/8 DOW#FC4/8C
09VFF0814E / CONN.14/8 CABLE DOW#FC816C4
09VFF0814C / CONN.14/8 CABL DOW #FC-816C2
User-added image
User-added image
 
 
 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255