Article

DAMPENING ROD PART NUMBERS WITH PICTURES

Printable View
« Go Back
Information
Validated
Published
DAMPENING-ROD-PART-NUMBERS-WITH-PICTURES
Article Details
000001534
DAMPENING ROD PART NUMBERS WITH PICTURES
Identify your dampening rod part number by comparing it to the pictures provided.

Dampening rods, also called damping rods, are used to reduce vibration caused by the motor and pump.  They are used primarily on Milnor presses.  The hydraulic pumps and booster pumps use dampening rods.  Below are pictures of the dampening rods we use. 

These first pictures show the location of the dampening rods in the system. 

User-added imageUser-added imageUser-added image

 

This second set of pictures show the part and measurements for reference. Notes concerning the part will be posted under the part information table.

 
PART NUMBERDESCRIPTION
60BS6840DAMPENING ROD #HC-254TC-W (SPECIAL)
User-added image




 
PART NUMBERDESCRIPTION
60BS6841DAMPENING ROD #HC-286TC-W (EACH = 1 BAR)
NOTE: IF CUSTOMER'S EXISTING PART IS BLACK AND RECTANGULER THEY MUST ALSO ORDER A BRACKET WITH THIS PART.
User-added image
User-added image




 
PART NUMBERDESCRIPTION
60BS6842DAMPENING ROD #SMB324405
User-added image 
User-added image




 
PART NUMBERDESCRIPTION
60BS6842DAMPENING ROD #SMB324405
User-added image



 
 
 
 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255